Author Topic: Challenger viper brake kit  (Read 1094 times)

Offline 01freeman

  • Jr. Member
  • **
  • Posts: 47
Challenger viper brake kit
« on: January 10, 2014 - 10:19:28 am »
Has anyone out there put together  a kit or pieces to install viper brakes on a 70-74 challenger. And when I say brakes I mean the calipers and same size but 5 lug rotors on an ebody.  I'd love to see some pics.  And part numbers to compete a set on a challenger.

Thanks




Offline moparman82

  • MOPAR or No car
  • Resident
  • *****
  • Posts: 2835
  • Livin' the dream
Re: Challenger viper brake kit
« Reply #1 on: January 10, 2014 - 11:40:27 am »
I'm just filling some space until brad chimes in.

 :popcorn:
Scott in Omaha
Searching for the right 70 Cuda driver
1973 challenger in go-mango, on it's way to a 70 T/A clone SOLD
2015 crew cab Hemi ram
2016 Tahoe LTZ
1976 Ramcharger 383 4spd

24 mopars past and 2 present

Offline 73EStroker

  • Sr. Member
  • ****
  • Posts: 1343
Re: Challenger viper brake kit
« Reply #2 on: January 10, 2014 - 12:25:24 pm »
I am about to sell my near new Cordoba setup and install the same Viper brakes. I tool the easy way, got hold of some 74 A body drum brake spindles and bought the complete adapter kit from Doctor Diff. I did not get his rotors because they were going to cost as much to drop ship to Canada as the price of the rotors themselves, but anyway, I need 73 c body !New Yorker rotors or aftermarket equivalent. My setup came at a reasonable price as I received the spindles for nothing from a friend and I got my Viper Calipers for $250. DDiff kit was $246 (not sure of exact) and rotors will run $200 or so. There are ways to do the same if you have more time than money and access to a milling machinery I took the easier path. As Moparman said - Brad might chime in and he made his adapters to do the same setup.
Barry (Salmon Arm)

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Challenger viper brake kit
« Reply #3 on: January 10, 2014 - 05:34:32 pm »
 :wave:  I did this.... http://www.cuda-challenger.com/cc/index.php?topic=73985.0

but the easiest way is to use either Dr Diff's kit as mentioned or Andy used to make a kit also? http://arengineering.com/
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0