Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cgraff]

Hurst Super Shifter.  Reverse lock out, works great in place of stock 4 spd. shifter. Includes Hurst mounting plate.  $100 520-444-0547

[cudasteve72]

can you put a pistol grip on with the reverse lock out?

[Changin Gears]

can you put a pistol grip on with the reverse lock out?

Yes you can, as long as its the bolt on version.

[73Chally]

Does this mount in the stock location, and are any mods needed to the tunnel?  Also, would this work with a console, or would the console have to come out?

[dodj]

Does this mount in the stock location, and are any mods needed to the tunnel?  Also, would this work with a console, or would the console have to come out?

I have a Super Shifter in my car and the tunnel needs to be modified, but only the hole in the top where the shifter is. The super shifter mounts higher and further off centre in order to have the 1/2, 3/4 shift rods straight. I have a console mounted with mine but the side of the console was cut out to accommodate the shifter. I think it shifts far better than the stock shifter did.

[cgraff]

Using the factory shifter rods, no modification is necessary.  I used this shifter with the factory counsel.  I believe the individual who modified his did so due to using the ram-rod or straight shifter rods which repositions the location of the shifter.  Again no modifications are necessary if using the factory linkage.