is this the nutsert tool from harbor freight?

[bb71challenger]

I have been looking off and on for the cheap nutsert tool and think I might have found it. Please let me know if this is it. Thanks.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=1210

[A R T]

 
Thats it.

[brads70]

I have the same one1 It worked great for installing my passenger side mirror! Mine didn't have one there before.

[422STROKER]

yes and no, the mirror screws were 10/32(at least thats what came with the mirrors) so a different head is necessary.  I used the 10/24 and got some stainless screws for them.

Tom

[bb71challenger]

yes and no, the mirror screws were 10/32(at least thats what came with the mirrors) so a different head is necessary.  I used the 10/24 and got some stainless screws for them.

Tom

I have the nutserts, just need something to install them with. 

[422STROKER]

right, but the tool comes with the specific sizes listed, no 10/32 set up.

Tom

[brads70]

right, but the tool comes with the specific sizes listed, no 10/32 set up.

Tom

I'll second that! I too used stainless 10-24 screws ( Lowes)

[rusty70cuda]

factory size is 10-24. ford chevy or the wonderful Dodge!

[bb71challenger]

Are you saying that the tool will not work with the factory nutserts? I spent a good penny on the factory style threaded rivets and it would be a bummer if this tool will not work on them. C'mon guys, gimme some good news, I could use some.

[RUSTY Cuda]

Pretty sure mine were 10-24 , borrowed a nutsert tool & used the nut & screw set I bought off ebay, can't remember the vendor at the moment,sorry ,Rich.

[422STROKER]

Do you have the mirror screws?  They have a small head to fit inside the recess on the mirror base.

Tom

I thought the screws that came with my repops were 10/32, I know I couldn't use them with the HF tool either way. 

[bb71challenger]

Do you have the mirror screws?  They have a small head to fit inside the recess on the mirror base.

Tom

I thought the screws that came with my repops were 10/32, I know I couldn't use them with the HF tool either way.

Yes. The inserts I bought came with the screws.

[422STROKER]

What thread?  If you look at the HF tool it only comes with the dies for certain threads.

Tom

[bb71challenger]

I will just have to wait and see how it works. I just want to install the threaded inserts I bought a while back. I will either make it work or figure something else out. I read a thread on here about a guy who was passing his around through the mail to whoever needed to use it. I assume its the same tool   

[422STROKER]

I hear you, it's worth the 16 bucks either way.

Tom

I think in a pinch you can use a couple nuts stacked on a longer screw to "draw" the inserts "up".