Author Topic: Quarter Window Seals  (Read 952 times)

Offline money pit

  • Jr. Member
  • **
  • Posts: 250
Quarter Window Seals
« on: May 24, 2020 - 12:37:00 AM »
Is the quarter window seal between the door glass and the quarter window supposed to be rubber?  The seal I bought from Classic Industies is felt.  It doesn't fit or seal very well.  Thanks




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6141
Re: Quarter Window Seals
« Reply #1 on: May 24, 2020 - 12:49:47 AM »
What you bought is correct
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline Barracuda73

  • Jr. Member
  • **
  • Posts: 15
Re: Quarter Window Seals
« Reply #2 on: May 24, 2020 - 04:45:28 AM »
Is the quarter window seal between the door glass and the quarter window supposed to be rubber?  The seal I bought from Classic Industies is felt.  It doesn't fit or seal very well.  Thanks
The seal should be rubber. The part number I bought was ws52904j. It slides into the track on the quarter window. I think this is the one you're talking about.

Sent from my Moto G Play using Tapatalk


Offline money pit

  • Jr. Member
  • **
  • Posts: 250
Re: Quarter Window Seals
« Reply #3 on: May 24, 2020 - 04:05:27 PM »
Yes. This is the seal I'm talking about.  Where did you purchase your seal? It seemed funny to me that the seal would be made of felt.  Thanks

Offline money pit

  • Jr. Member
  • **
  • Posts: 250
Re: Quarter Window Seals
« Reply #4 on: May 24, 2020 - 04:21:44 PM »
I looked online and found that there are rubber and felt seals. The early 1970 barracudas used the felt and the late ones used rubber. The late 70 to 74 used rubber. I'm going to see if the rubber seal will work.  I couldn't tell what seal was on the car since it was missing, when I bought the car. Thanks.