Author Topic: Lh fender for 74 cuda  (Read 200 times)

Offline Ohiowoodchuck

  • Jr. Member
  • **
  • Posts: 7
Lh fender for 74 cuda
« on: July 10, 2019 - 11:45:31 pm »
Looking for a lh fender for a 74 cuda.




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5693
Re: Lh fender for 74 cuda
« Reply #1 on: July 11, 2019 - 12:02:30 am »
Don't want a repop?
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline Ohiowoodchuck

  • Jr. Member
  • **
  • Posts: 7
Re: Lh fender for 74 cuda
« Reply #2 on: July 11, 2019 - 04:31:15 pm »
I'm not against one as I dont have the orignal motor to make it numbers matching but I've heard the aftermarket dont fit really well. I thought maybe I could get lucky and find a decent orignal.

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5693
Re: Lh fender for 74 cuda
« Reply #3 on: July 11, 2019 - 04:45:20 pm »
Well I wish you luck finding one, I am sure they are out there but when I did my Cuda I bought 2 Goodmark repops, they did need some work but it wasn't horrible. That said, if I did it again I would buy AMD, I have used a lot of their sheet metal and it is usually far better quality. All that said, understand that a brand new fender may not seem to fit well, may not be the fender at all but rather the car. After 45 years things have shifted and moved, so its very likely that no matter what you get you will have to do some adjusting. Personally I would rather be using brand new sheet metal than having to fix old sheet metal which invariably you will have to with a used fender, just saying.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline Ohiowoodchuck

  • Jr. Member
  • **
  • Posts: 7
Re: Lh fender for 74 cuda
« Reply #4 on: July 11, 2019 - 05:03:01 pm »
I understand. I've even heard some bad stories with the amd fenders not fitting right. I thought it was worth a shot and someone on here might have one they would part with.

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5693
Re: Lh fender for 74 cuda
« Reply #5 on: July 11, 2019 - 08:07:00 pm »
Perhaps someone does, doesn't hurt to ask  :bigsmile:
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)