Author Topic: heater water valve cable and mounting clip  (Read 138 times)

Offline john h

  • Jr. Member
  • **
  • Posts: 206
heater water valve cable and mounting clip
« on: June 12, 2019 - 10:49:38 am »
Hi All,
Sorry, I don't know if this is the place for this thread but it's under the hood near the engine at least. I'm looking for a place to buy the little clips that go on the heater valve that the cable connects to.  I have the valve but the self adjusting clip is missing.  I think it was used on all models from mid 60's to late 70's models with air.  I feel like it's a common clip and I should be able to find it locally in a parts store or Dorman help section but I just can't find it.  Detroit muscle technologies carries it but it's in Michigan and the shipping is more than the part.  Any ideas?

Thanks
John
John
73 Cuda
360 Crate motor
FiTech Fuel injection
727 Trans (wishing it had Over Drive)




Offline bcudachris1

  • Jr. Member
  • **
  • Posts: 3
Re: heater water valve cable and mounting clip
« Reply #1 on: June 12, 2019 - 12:41:13 pm »
R/T Specialties for the clip: http://www.rtspecialties.net/

Cables can be had from many vendors, I got one from Rock Auto.