Author Topic: Chevy buddy: "I know where there is a 71 Cuda in a barn" me: "sure you do :)"  (Read 274 times)

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 8794
  • Tastes Like Chicken
there's almost no information about that 71 bh you purchased either. 

Winchester Grey is an awesome color.  Better than the B5 in my opinion. 

Did you say that you might restore the bh 70 instead of the bs71?  Interesting. 
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee




Offline ed-pv

  • Jr. Member
  • **
  • Posts: 179
Kids had fun putting the build sheet back together...or what was left of it!  Do you guys think I can make a fender tag from the build sheet?

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5366
I guess it depends on who you go to for a tag. Some will require a complete sheet, others merely have you fill out the tag blank and leave it up to you to make sure it is correct. If it where me, I would get or make a broadcast sheet template and then fill in what you have, you should be able then to see what is missing and through some detective work (as in looking at other sheets, quite a few online) get close. Once you have that, you should be able to get one made. Of course this is a highly controversial issue with some believing that if you do not have a complete sheet or a tag (like a damaged but original tag), that you should not be able to get one. I don't subscribe to this thinking but I am going to leave it at that as I believe every Mopar forum has had more than one war over this subject and I am not interested in starting one here.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 8794
  • Tastes Like Chicken
Definitely get one made as close as you can.  That is really cool that you got that far with the build sheet.  Still have more pieces for it?  Kinda hard to tell all the details. 

 Awesome your kids are involved. 
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5366
I might have a template in Word somewhere, it would not produce a broadcast sheet per se, but it would allow you to fill in the information you have and I think provide the areas you are missing. I believe it is a 1970 edition as the sheets changed over the years. I will have to look for it.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline ed-pv

  • Jr. Member
  • **
  • Posts: 179
I might have a template in Word somewhere, it would not produce a broadcast sheet per se, but it would allow you to fill in the information you have and I think provide the areas you are missing. I believe it is a 1970 edition as the sheets changed over the years. I will have to look for it.

That would be awesome!  Please let me know.

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5366
pm me a email address
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)