Author Topic: Engine rebuild  (Read 76 times)

Offline mojavered

  • Full Member
  • ***
  • Posts: 852
  • Someday!
Engine rebuild
« on: April 15, 2019 - 01:19:13 am »
Anyone know of a good engine builder in northern Nevada (Reno) area or maybe Northern California for our Mopars?  Engine and heads need to be gone through, its had quite a few hard miles on it and its time.  Thanks for your help..
Jason
Jason




Offline IRON MAN

  • Jr. Member
  • **
  • Posts: 67
Re: Engine rebuild
« Reply #1 on: April 15, 2019 - 09:05:45 pm »
I had a pair of cylinder heads completely rebuilt by  Loyd Engineering, 3780 Main Street, Oakley, Ca. They build a lot of engines for the local hot rodders and for the dirt track racers who race at the nearby Antioch Speedway. The head specialist is a guy named Jesus. He was the manager of the Cylinder Head Dept at  Valley Head Service, Northridge, Ca. He has been written about in most of the Muscle car magazines. Only let Jesus do the work... otherwise go to Valley Head Service down south. Joe's Engine shop in Concord, Ca came highly recommended by several forum members on another website. I had Joe balance the rotating assembly, and machine the block, and very satisfied with his work.

Offline mojavered

  • Full Member
  • ***
  • Posts: 852
  • Someday!
Re: Engine rebuild
« Reply #2 on: April 18, 2019 - 11:16:58 pm »
Thanks for the reply.  I will look into them.
Jason