Author Topic: Shoulder Belts 70 Cuda  (Read 198 times)

Offline DirksCuda

  • Jr. Member
  • **
  • Posts: 282
Shoulder Belts 70 Cuda
« on: April 01, 2019 - 07:09:37 am »
Im about to put my shoulder belts in the cuda. My question is do the covers on the 2 hangers suppose to come off so u can get at the holes to put the 2 screws in. They look like they should but I cant see any other way of getting at the screws.   




Online 70chall440

  • Sr. Resident
  • ******
  • Posts: 5476
Re: Shoulder Belts 70 Cuda
« Reply #1 on: April 01, 2019 - 11:33:19 am »
Are you talking about the coat hooks or the shoulder belt holders?

If talking about the coat hooks - There are 2 styles of E body coat hooks, the early version which has a cover over the hook assembly which must be removed in order to install the hook substructure, then the cover goes on over it. On the later version, the screw goes straight through the hole in the hook.

If talking about the shoulder belts, the covers are folded down/out to allow the bolts to be put in and then the covers are repositioned to cover the bolt/plate.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline DirksCuda

  • Jr. Member
  • **
  • Posts: 282
Re: Shoulder Belts 70 Cuda
« Reply #2 on: April 02, 2019 - 07:00:16 am »
Shoulder belts got it figured out Thanks

Online 70chall440

  • Sr. Resident
  • ******
  • Posts: 5476
Re: Shoulder Belts 70 Cuda
« Reply #3 on: April 02, 2019 - 12:33:38 pm »
Glad you got it sorted out.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)