Author Topic: Side window parts ID  (Read 103 times)

Offline V12T

  • Jr. Member
  • **
  • Posts: 30
Side window parts ID
« on: March 05, 2019 - 09:06:09 am »
I have installed a manual window in my 1970 Challenger which seems to work but have a few parts left over in the box - see pic.
I'm sure the two (per door) guides must go somewhere, the other two pieces may be something else completely. Can you please ID them for me.




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5030
Re: Side window parts ID
« Reply #1 on: March 05, 2019 - 11:42:40 am »
Top to bottom

Hood alignment bumper (one goes on each side of the hood screwed to the fender on the lip that the bolts are on)

Remote mirror clip (goes over the mirror barrel which is the part that goes through the door panel, this clip keeps the barrel from coming through the door panel)

window adjustments (these bolt to the body and ride against the glass as it goes up and down)
Current Mopar
70 Challenger RT 440-6, 73 Cuda (under const)
05 Durango, 99 Dakota, 01 Ram 4x4, 14 2500 4X4, 10 PCP Challenger RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR, 61 Jeep FC170
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline V12T

  • Jr. Member
  • **
  • Posts: 30
Re: Side window parts ID
« Reply #2 on: March 05, 2019 - 01:42:15 pm »
Thanks - great knowledge.  I thought that they were glass guides of some sort but cannot figure where they attach to the door. Can you give me a location please.

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5030
Re: Side window parts ID
« Reply #3 on: March 05, 2019 - 09:07:16 pm »
Yes, they go up to the top of the window channel. BTW they are called window guides.

Here are 2 pictures. Look for slotted holes up near top of the inside frame. The doors have 2 guides, one in the front and one towards the rear.
Current Mopar
70 Challenger RT 440-6, 73 Cuda (under const)
05 Durango, 99 Dakota, 01 Ram 4x4, 14 2500 4X4, 10 PCP Challenger RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR, 61 Jeep FC170
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline V12T

  • Jr. Member
  • **
  • Posts: 30
Re: Side window parts ID
« Reply #4 on: March 06, 2019 - 05:16:17 am »
Found the slots and it was obvious how they fit and work. Easy when you know how! Thanks again for your expertise.

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5030
Re: Side window parts ID
« Reply #5 on: March 06, 2019 - 11:25:57 am »
Welcome, glad you got it sorted out. None of us were born with any of this knowledge, we all had to either figure it out or have someone tell/teach us. Its all good.
Current Mopar
70 Challenger RT 440-6, 73 Cuda (under const)
05 Durango, 99 Dakota, 01 Ram 4x4, 14 2500 4X4, 10 PCP Challenger RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR, 61 Jeep FC170
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)