Author Topic: Engine Seals and Gaskets wanted for a 340 1973 Cuda  (Read 47 times)

Offline sbrinsky

  • Jr. Member
  • **
  • Posts: 30
Engine Seals and Gaskets wanted for a 340 1973 Cuda
« on: January 06, 2019 - 02:01:13 pm »
Hoping for some assistance.

I am struggling here.

For a 1973 Cuda 340 engine Auto Trans, I am hoping someone here could recommend a supplier and brand for a:

Front Seal

Rear Seal

Oil Pan seal


Thanks all in advance,

Shawn B




Offline 70chall440

  • Resident
  • *****
  • Posts: 4893
Re: Engine Seals and Gaskets wanted for a 340 1973 Cuda
« Reply #1 on: January 06, 2019 - 04:38:58 pm »
Ok, are these engine gaskets or trans gaskets? Either way, Felpro is a good brand however there are many more expensive brands out there as well. Check out Mancini Racing.
Current Mopar
70 Challenger RT 440-6, 73 Cuda (under const)
05 Durango, 99 Dakota, 01 Ram 4x4, 14 2500 4X4, 10 PCP Challenger RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR, 61 Jeep FC170
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline jimynick

  • Resident
  • *****
  • Posts: 4071
Re: Engine Seals and Gaskets wanted for a 340 1973 Cuda
« Reply #2 on: January 06, 2019 - 10:43:03 pm »
If you're changing a cam here, there are dedicated cam change gasket kits and as Mike said, Fel Pro has a good name, but there are Mr.Gasket, Victor Reinz, Cometic, etc. also available. Get on the 'net and punch into Google what you're after and make a choice. Good luck.  :cheers:

Offline sbrinsky

  • Jr. Member
  • **
  • Posts: 30
Re: Engine Seals and Gaskets wanted for a 340 1973 Cuda
« Reply #3 on: January 13, 2019 - 01:02:49 pm »
Thank You,
Shawn B