Author Topic: Rear sway bar hardware for a 1970 Cuda  (Read 616 times)

Offline soccernut43

  • Jr. Member
  • **
  • Posts: 24
Rear sway bar hardware for a 1970 Cuda
« on: April 18, 2018 - 09:01:18 am »
Anybody know where I could get the hardware for a 1970 rear sway bar for a 1970 Cuda?  Autozone may have the bushings but the bolts seem to be very difficult to find.  Thanks!!!




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5562
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline soccernut43

  • Jr. Member
  • **
  • Posts: 24
Re: Rear sway bar hardware for a 1970 Cuda
« Reply #2 on: April 18, 2018 - 08:58:10 pm »
The only thing is I don't need the sway bar or the mounts.  Just the bushings and bolts.

Offline 1 Wild R/T

  • Resident
  • *****
  • Posts: 4594
Re: Rear sway bar hardware for a 1970 Cuda
« Reply #3 on: April 18, 2018 - 09:57:40 pm »
You won't find a listing for parts for a rear bar on a E body but the end links or a E body rear are originally 68-70 B body front pieces...   However if you want the OE design with nuts on each end you'll have to source originals cause the aftermarket replaces it with a normal bolt like everyone else uses.....
JS27N0B 70 Challenger R/T Convertible  FJ5 Sublime, Show Poodle w/90,000 miles since resto
WS27L8G 68 Coronet R/T Convertible  PP1 Bright Red, Project
RM21H9E 69 Road Runner Coupe R4 Performance Red, Sold...
5H21C  65 Falcon 2 dr Wagon... Dog Hauler...

Offline JayBee

  • Resident
  • *****
  • Posts: 2373
Re: Rear sway bar hardware for a 1970 Cuda
« Reply #4 on: April 19, 2018 - 07:15:26 am »
Here's a picture I saved from years ago, hope it helps. I was able to find something very similar through my old workplace, you might get lucky locally too.
John

1970 Barracuda convertible
2000 Toyota Avalon

Offline soccernut43

  • Jr. Member
  • **
  • Posts: 24
Re: Rear sway bar hardware for a 1970 Cuda
« Reply #5 on: April 19, 2018 - 08:50:15 pm »
I'm going to have to check out the Roadrunner front sway bar parts.  Only problem is I measured the diameter of my rear sway bar and it came out 0.74 inches.  Little less then 3/4 of an inch. 

Thanks for all the info guys. More then I had before I posted. 

Offline djw383

  • Jr. Member
  • **
  • Posts: 350
Re: Rear sway bar hardware for a 1970 Cuda
« Reply #6 on: April 26, 2018 - 10:11:37 pm »
Firm Feel has them


Sent from my iPhone using Tapatalk