Author Topic: Another Aussie  (Read 2997 times)

Offline T-bar

  • Jr. Member
  • **
  • Posts: 18
Re: Another Aussie
« Reply #30 on: August 28, 2010 - 04:51:04 pm »
Russ i got them from Hemco in Ballarat Vic. Do you want the part no. i put retractable lap sash in the front and static lap sash both sides in the rear and a lap in the middle rear. Tehy came with all the bolts and spacer's and i bought the reo plates from them as well ( the ones that mount where there isn't any original mounts). I used the original roof mount with 200mm drop link, I know some other people have mounted them off the bottom of the window area but i don't mind them up high. :thumbsup:




Offline _Russ_

  • Not very family friendly!
  • Full Member
  • ***
  • Posts: 667
  • Chk Chk Boom!
    • Show Me How To Live
Re: Another Aussie
« Reply #31 on: August 28, 2010 - 07:32:18 pm »
Yeah a part number would be great, please mate :)

Offline punisher72

  • Jr. Member
  • **
  • Posts: 293
  • 70Challenger 440 4 speed yeeehaaaaa!!!!!!!
Re: Another Aussie
« Reply #32 on: August 29, 2010 - 02:29:39 am »
The Chrysler club is really good mate. Heaps of good people and cars,allways good to go cruising and hang out with :)
http://www.queenslandchryslers.com.

Offline T-bar

  • Jr. Member
  • **
  • Posts: 18
Re: Another Aussie
« Reply #33 on: August 30, 2010 - 02:30:20 am »
Hay Russ sorry for the delay but I had to go out of town for work. So here are the part no. 1 x 1790002 static lap belt (middle one)
            2 x 1790004 static lap sash ( rear driver and pass.)
            2 x 1790001sp inertia lap/sash with 200mm drop links (your choice of stalk or adjustable web belt) I went for 250mm stalk.
Hope this helps mate. :2thumbs:     

Offline Talkwrench

  • Perth, Western Australia
  • Jr. Member
  • **
  • Posts: 391
Re: Another Aussie
« Reply #34 on: August 30, 2010 - 02:55:04 am »
t-Bar just out of curiosity [?] the rear right and left belt, who are they made by and how much are they?
I just ordered some but not really sure of the cost yet and I think they may be Klippan ones ... :clueless:
"Came too close to dying to stop living now!"

Offline _Russ_

  • Not very family friendly!
  • Full Member
  • ***
  • Posts: 667
  • Chk Chk Boom!
    • Show Me How To Live
Re: Another Aussie
« Reply #35 on: August 30, 2010 - 05:06:20 am »
Thanks mate!



Talkwrench -

Few posts up, he mentions they're from Hemco.

Offline T-bar

  • Jr. Member
  • **
  • Posts: 18
Re: Another Aussie
« Reply #36 on: August 30, 2010 - 06:03:13 am »
The back one's cost $77 ea incl. I don't know how much the Klippan one's were I found it to hard with their info to work out which to use and like Russ said I used Hemco.

Offline Talkwrench

  • Perth, Western Australia
  • Jr. Member
  • **
  • Posts: 391
Re: Another Aussie
« Reply #37 on: August 30, 2010 - 06:48:28 am »
They are a little cheaper, however I suppose postage on top .. :sly: I picked up mine and they would be the same. They are short ones about 2 mts long so similar... $ 95 each and that was from someone I know ..  :eek4:
"Came too close to dying to stop living now!"

Offline Aussie Challenger

  • Resident
  • *****
  • Posts: 3395
  • In Kansas loaded for Drive to West Coast.
Re: Another Aussie
« Reply #38 on: August 30, 2010 - 06:51:56 am »
My engineer recommended Hemco belts with their drop link however I don't want to mount off the roof as I don't like the belt flapping around my neck so am custom making mounts on the pillar area the same as nqkjw from North Queensland has done, he is also on the Mopar market site in Australia and has a few pics.   :cheers:
Dave

Offline Hemi Dude

  • Jr. Member
  • **
  • Posts: 49
Re: Another Aussie
« Reply #39 on: August 30, 2010 - 09:11:27 am »
Welcome to my nightmare T-bar!
I love '70 Cuda's. Too bad it is not a bad ass Hemi like my '70 Challenger but you will get there. Very nice car.
The seat belt issue is crap. My Challenger only has aftermarket lap belts only, i also hate the seatbelts cutting my neck so i never fitted them. I have bribed my local blue slip guy whom had no idea what to do with my car and rego was a breeze. There is no ADR's to worry about in NSW for a '70 make US car. Anyone tell you that you need an engineers report for a US car built before '72 in NSW has no idea what the rules are. Queensland rules are the most ridicoules. Good luck guys.
Cheers, Chris.
'70 Hemi Challenger (modified)
'74 El Camino SS 454

"It takes a Mopar to catch a Mopar"