Author Topic: Console Install  (Read 184 times)

Offline DirksCuda

  • Jr. Member
  • **
  • Posts: 279
Console Install
« on: February 19, 2019 - 11:03:26 am »
Im about to put my console in my 70 cuda. does the boot and the trim ring go under the carpet or on top. Its a 4spd console. Ive got it on top but it don't look right to me just wanted to be sure. Thanks




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5323
Re: Console Install
« Reply #1 on: February 19, 2019 - 12:19:25 pm »
The boot itself is under the carpet, the chrome trim ring is on top of the carpet. If you look at the boot and the trim ring you will see that the screws for each are offset.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline DirksCuda

  • Jr. Member
  • **
  • Posts: 279
Re: Console Install
« Reply #2 on: February 19, 2019 - 12:36:07 pm »
That's the way I gotit,so now do I pull the boot up around the shifter opening. when I set the console in I can see down in there and the chrome can be seen on the drivers side

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5323
Re: Console Install
« Reply #3 on: February 19, 2019 - 01:00:11 pm »
yes, you will see the chrome ring with the console in place. should look like this
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline DirksCuda

  • Jr. Member
  • **
  • Posts: 279
Re: Console Install
« Reply #4 on: February 19, 2019 - 01:22:30 pm »
Thanks

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5323
Re: Console Install
« Reply #5 on: February 19, 2019 - 04:03:12 pm »
No problem.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)