Author Topic: Cuda bolt chart  (Read 763 times)

Offline Deanscuda

  • Jr. Member
  • **
  • Posts: 4
Cuda bolt chart
« on: November 07, 2018 - 12:33:26 pm »
Is there anywhere that I can find a list of bolt sizes and types for the e-body?  Particularly for things like doors, fenders, hood, etc?




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5137
Current Mopar
70 Challenger RT 440-6, 73 Cuda (under const)
05 Durango, 99 Dakota, 01 Ram 4x4, 14 2500 4X4, 10 PCP Challenger RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR, 61 Jeep FC170
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline larry4406

  • Jr. Member
  • **
  • Posts: 355
Re: Cuda bolt chart
« Reply #2 on: November 08, 2018 - 05:38:08 am »
That looks like a pretty good reference!  Bit pricey though.

Offline Deanscuda

  • Jr. Member
  • **
  • Posts: 4
Re: Cuda bolt chart
« Reply #3 on: November 08, 2018 - 08:19:28 am »
Yeah, its nice but I was kinda just looking for a website.  Theres a couple of good ones I used to reference when putting my Bronco back together.

Anyway, the door bolts are 3/8-16 x 1-3/16 SEMS dog point body bolts.  The ones in the car side have large washers and the ones in the door itself have small ones.  They are not easy to find unless you want to pay through the nose.

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 5137
Re: Cuda bolt chart
« Reply #4 on: November 08, 2018 - 11:16:14 am »
I have never seen a website that provides the information you are seeking in any kind of easy to access/understand format.

The Mopar world isnt like the Bronco world bc the guys who really know stuff like that are in a business of some kind related to restoring these cars and in my experience hold this type information pretty close.

The book isn't cheap but I don't think $125 is outrageous for what it is. If you are trying to restore a car or just want the correct bolts/screws is specific area, this book will generally provide the information. I say "generally" because it was a bit light on the later E bodies (72-74). It does provide very detailed information on the fasteners.
Current Mopar
70 Challenger RT 440-6, 73 Cuda (under const)
05 Durango, 99 Dakota, 01 Ram 4x4, 14 2500 4X4, 10 PCP Challenger RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR, 61 Jeep FC170
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)