Cuda-Challenger.com

Chryco's Tech Shop => The Archives => Topic started by: jbearden on November 16, 2014 - 06:07:59 pm

Title: 70 Cuda tail panel
Post by: jbearden on November 16, 2014 - 06:07:59 pm
I'm sure that I know the answer to this but the AAR that I recently acquired has me confused.It appears that the "'cuda" tail panel emblem came on the drivers side of the car.Has anyone ever run into this?I have pics that can be posted later.
Title: Re: 70 Cuda tail panel
Post by: anlauto on November 16, 2014 - 07:58:32 pm
Your car is obviously not original, and it's a stick on emblem, so somebody obviously just stuck it on the wrong side after a repaint. :2cents:
Title: Re: 70 Cuda tail panel
Post by: jbearden on November 17, 2014 - 05:57:14 pm
I thought so too,but while I was digging around in the trunk I noticed that the holes were drilled on the driver side and there is nothing on the passenger side.I have added these pics to photo bucket if you wouldn't mind taking a look.

http://s42.photobucket.com/user/jamesrbeardenii/library/Mobile%20Uploads (http://s42.photobucket.com/user/jamesrbeardenii/library/Mobile%20Uploads)
Title: Re: 70 Cuda tail panel
Post by: anlauto on November 17, 2014 - 06:02:12 pm
That would be for a dealership emblem....very common in the 70's, in fact...my AAR has them too.
Title: Re: 70 Cuda tail panel
Post by: jbearden on November 17, 2014 - 06:31:32 pm
Thank you for clearing that up.I was getting getting really confused.
Title: Re: 70 Cuda tail panel
Post by: 3D on February 13, 2015 - 06:55:15 pm
This Should Help.
Title: Re: 70 Cuda tail panel
Post by: gf7cuda on December 01, 2016 - 08:47:50 pm
would you have a pick for 71 cuda tail panels emblems (2) measurements???