Cuda-Challenger.com

Chryco's Tech Shop => The Archives => Topic started by: 72ls5fla on January 01, 2012 - 01:30:30 am

Title: Need Tooth Count for Correct Speedometer Gear ----
Post by: 72ls5fla on January 01, 2012 - 01:30:30 am
hey all .....

What gear do I need for a 3.54 Dana with F60-15 tires (727 Auto) ?

I am taking the 4.10's out of my car and putting 3.54's in to make the car a bit more drivable.

Thanks in advance ...   :)
Bill
Title: Re: Need Tooth Count for Correct Speedometer Gear ----
Post by: brads70 on January 01, 2012 - 07:36:43 am
Does this help?
(http://i651.photobucket.com/albums/uu240/B_Richmond/speedo3gear.jpg)
Title: Re: Need Tooth Count for Correct Speedometer Gear ----
Post by: 72ls5fla on January 01, 2012 - 08:42:38 am
yes .....

THANKS very much!!!

Bill
Title: Re: Need Tooth Count for Correct Speedometer Gear ----
Post by: brads70 on January 01, 2012 - 10:47:52 am
 :2thumbs:
Title: Re: Need Tooth Count for Correct Speedometer Gear ----
Post by: TinCuda on January 01, 2012 - 11:11:59 am
I have been looking for a graph like this for a friend of mine.  I think that I will just grab this one...


.,