Cuda-Challenger.com
Chryco's Tech Shop => Electrical => Topic started by: Roadrunner420 on November 24, 2017 - 07:32:32 PM
-
(https://uploads.tapatalk-cdn.com/20171125/48c9b74d9b47cda41ac820bdfda2bc55.jpg)(https://uploads.tapatalk-cdn.com/20171125/9627aab9698dd6c290f6b0ff31f86053.jpg)Does anyone know it this is the socket needed for 70-71 Cuda rear marker lamps- says it fits a 5/8” hole.
Sent from my iPhone using Tapatalk
-
If anyone wants to know works great a little tight but for $6.99 a piece not bad
Sent from my iPhone using Tapatalk
-
Your post it timely because I was looking for a socket for a left rear '70 Challenger marker light. Was this the type you bought? This is from Summit. It's for a 1895 bulb. (https://uploads.tapatalk-cdn.com/20171209/20ef6bd8b17b5b7b9e372e844a767385.jpg)
-
Your post it timely because I was looking for a socket for a left rear '70 Challenger marker light. Was this the type you bought? This is from Summit. It's for a 1895 bulb. (https://uploads.tapatalk-cdn.com/20171209/20ef6bd8b17b5b7b9e372e844a767385.jpg)
Can you post it again didn’t see the picture
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20171211/8c562c83ef2c4c69fe599cc87994b8d7.jpg)
Not sure what happened with the picture. Hope this works.
-
(https://uploads.tapatalk-cdn.com/20171212/a9a33a24388fe646cde0ebe4acdd0b52.jpg)i got mine from EBay
Sent from my iPhone using Tapatalk