Cuda-Challenger.com

Chryco's Tech Shop => Electrical => Topic started by: DirksCuda on November 16, 2017 - 02:24:46 PM

Title: Rear Wiring Harness 70 Cuda
Post by: DirksCuda on November 16, 2017 - 02:24:46 PM
I'm just looking at my rear wiring harness for a 70 Cuda.Going over every thing for when I get it back from the paint shop.My question isat the plug in for the interior light there are 2 black wires that have been cut off are these for the gas gauge. I have another harness about 4 ft long with 2 blacks and a connector on one end. Iv got all yhe lights and sockets at the back but nothing for the fuel gauge.Im thinking the 2 that are cut off have to be the ones. The car was in pieces when I got it so I didn't take it apart Thanks for any help
Title: Re: Rear Wiring Harness 70 Cuda
Post by: AARuFAST on November 16, 2017 - 06:42:19 PM
Hope this will help
Title: Re: Rear Wiring Harness 70 Cuda
Post by: DirksCuda on November 17, 2017 - 06:30:26 PM
Thanks AARUFast the diagram worked I cleaned the one wire and it was dark blue for the fuel gauge. But the plug in for the dome light is Yellow and Pink with a red wire coming off the plug the diagram shows a red one mine is black. Is black useally grond right Thanks Dirk