Barracuda Challenger Forum

Author Topic: Stainless exhaust  (Read 1073 times)

Offline 60K T/A

  • Jr. Member
  • **
  • Posts: 234
Stainless exhaust
« on: October 19, 2016 - 08:13:46 pm »
I need to do the the exhaust on my Cuda and thought of using SS. Are there any vendors who make this mandrel bent? Open headers a friggen LOUD.
T/A, Survivor,
M37B1 Sold
W350

It took about 35 years for the "politicians" to RUIN this country just to line their pockets




Offline moprr

  • Jr. Member
  • **
  • Posts: 339
Re: Stainless exhaust
« Reply #1 on: October 19, 2016 - 09:07:03 pm »
Magnaflow makes them

Online brads70

  • C-C.com Expert
  • ********
  • Posts: 18754
Re: Stainless exhaust
« Reply #2 on: October 19, 2016 - 09:33:35 pm »
Magnaflow makes them

 :iagree:  I got the Magnaflow stainless system.  :2thumbs: I'm happy with it.
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0


Offline crash340

  • Sr. Member
  • ****
  • Posts: 1286
Re: Stainless exhaust
« Reply #3 on: October 19, 2016 - 09:35:02 pm »
Yep I'm with Magnaflow
Greg

73 Cuda
Brisbane, Australia

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6177
Re: Stainless exhaust
« Reply #4 on: October 22, 2016 - 08:32:32 am »
Magnaflow makes them
I have the Magnaflows as well. Got the 'X' pipe setup. Had to do a bit of work to get them to mate up with the headers but other than that they fit very well.
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.

Offline 60K T/A

  • Jr. Member
  • **
  • Posts: 234
Re: Stainless exhaust
« Reply #5 on: October 24, 2016 - 06:22:41 pm »
I've got headers too. Will i need to get 90's, 45's. and 30 degree short bend pipes to make it fit?
T/A, Survivor,
M37B1 Sold
W350

It took about 35 years for the "politicians" to RUIN this country just to line their pockets

Online brads70

  • C-C.com Expert
  • ********
  • Posts: 18754
Re: Stainless exhaust
« Reply #6 on: October 24, 2016 - 06:36:27 pm »
I've got headers too. Will i need to get 90's, 45's. and 30 degree short bend pipes to make it fit?

I say one 90 will be enough, you will need to do some "cutting and pasting" to line the one side up with the header. At least on mine anyhow?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline crash340

  • Sr. Member
  • ****
  • Posts: 1286
Re: Stainless exhaust
« Reply #7 on: October 25, 2016 - 09:13:34 am »
 I have fitted MF's twice now and not needed to buy any additional bends pipe etc, I did by a set of stainless header adapters as my TTI's had aluminised adaptors.
Greg

73 Cuda
Brisbane, Australia

Offline BIG MIKE

  • Sr. Member
  • ****
  • Posts: 1270
Re: Stainless exhaust
« Reply #8 on: May 28, 2017 - 09:09:57 pm »
Pypes has i nice set.... I put one on a duster with a 318 stroker.... Ran 13.10 on street tires.


Offline dougs bs23

  • Sr. Member
  • ****
  • Posts: 1690
Re: Stainless exhaust
« Reply #9 on: June 06, 2017 - 04:22:49 pm »
Got my x pipe system from pypes. Kit came complete with mufflers, clamps and hangers
see Bill run  go Navy football///fly navy

Offline TelisSE440

  • Sr. Member
  • ****
  • Posts: 1734
Re: Stainless exhaust
« Reply #10 on: June 07, 2017 - 02:31:44 am »
I got the Magnaflow stainless exhaust system 3'' It is a good system, no problems until now, but you need to make a few mods, especially when mating with the headers and from the muffler hangers until rear valance, you will do some mods

Online 340-FOUR- BARRELL

  • Jr. Member
  • **
  • Posts: 79
Re: Stainless exhaust
« Reply #11 on: July 20, 2017 - 12:00:12 am »
Magnaflows! :ylsuper: Love the deep mellow sound of them.

Offline jimynick

  • Resident
  • *****
  • Posts: 3812
Re: Stainless exhaust
« Reply #12 on: July 20, 2017 - 10:42:14 pm »
I priced the Pypes SME11S SS 2.5" system at their tent at Carlisle and the show price was $410- the exact same as the any day price from Summit, FWIW 

Offline TelisSE440

  • Sr. Member
  • ****
  • Posts: 1734
Re: Stainless exhaust
« Reply #13 on: July 21, 2017 - 08:40:54 am »
Magnaflows! :ylsuper: Love the deep mellow sound of them.

 :iagree: 

Offline dougs bs23

  • Sr. Member
  • ****
  • Posts: 1690
Re: Stainless exhaust
« Reply #14 on: August 08, 2017 - 12:36:03 pm »
I priced the Pypes SME11S SS 2.5" system at their tent at Carlisle and the show price was $410- the exact same as the any day price from Summit, FWIW
I found that there were not any real show special pricing deals at several of the vendors I was interested in at Carlisle.  Guess the days of show specials are over.
see Bill run  go Navy football///fly navy