Author Topic: 71 cuda belt molding/trim pins and holes  (Read 1040 times)

Offline culp71

  • Full Member
  • ***
  • Posts: 639
71 cuda belt molding/trim pins and holes
« on: May 22, 2014 - 01:11:58 pm »
on a 71 cuda,
does anyone have a pic showing correct hole and pin layout for the 1/4 window belt moldings.
(I was able to piece together from pics found here of the door, but what about behind door?)




Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 8437
  • Tastes Like Chicken
Re: 71 cuda belt molding/trim pins and holes
« Reply #1 on: May 22, 2014 - 09:32:32 pm »
Can you supply a picture of the exact area that you speak of?
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline culp71

  • Full Member
  • ***
  • Posts: 639
Re: 71 cuda belt molding/trim pins and holes
« Reply #2 on: May 23, 2014 - 09:51:04 am »
most certainly, area behind doors, below corner window glass, on top of the edge. below is a pic from a similar post for a 70, but I need clarification and correct post and hole placement on a 71. thanks.
« Last Edit: May 23, 2014 - 12:30:11 pm by culp71 »


Offline culp71

  • Full Member
  • ***
  • Posts: 639
Re: 71 cuda belt molding/trim pins and holes
« Reply #3 on: May 29, 2014 - 09:02:47 am »
help.

Offline Haddixj

  • Full Member
  • ***
  • Posts: 641
Re: 71 cuda belt molding/trim pins and holes
« Reply #4 on: May 29, 2014 - 10:51:54 am »
 I'll look at my car when I get home but I think they may have been welded up. Can you pm me your number and I can text pics if I have them. I'll also look at my tail panel and see if I can get the correct hole size for you

Offline AARTA340

  • Sr. Member
  • ****
  • Posts: 1223
Re: 71 cuda belt molding/trim pins and holes
« Reply #5 on: May 31, 2014 - 12:39:35 am »
Here is a picture from a 71 Gran Coupe, it is the left side. Unable to rotate the car for the right side. Hope this helps. Have a 70 and it looks just like the picture you posted minus the error on the 4th hole.

Offline culp71

  • Full Member
  • ***
  • Posts: 639
Re: 71 cuda belt molding/trim pins and holes
« Reply #6 on: June 05, 2014 - 12:18:01 pm »
that'll work just fine, thanks.

Offline 4 speed fish

  • Full Member
  • ***
  • Posts: 848
Re: 71 cuda belt molding/trim pins and holes
« Reply #7 on: August 25, 2017 - 02:10:00 pm »
Is their 5 holes or is the 4th hole wrong?