Author Topic: 70 Cuda door panel -fuzzies-trim-upper window rubber- installation  (Read 122 times)

Offline electros

  • Jr. Member
  • **
  • Posts: 38
I pulled off the upper trim from my door panels and assumed a re-pop set would go on without a hitch-I ordered a set from ebay and what I got were a set that needed to be riveted on-I got back to the seller who agreed to take them back=but-I was at Long Beach swap meet today and was looking at a 71 440 cuda and the window trims on that car were riveted on-I tried to talk to the owner but he was not interested in my questions about the rivets  being non original-anyone have any thoughts on this and or can the original push on types be found?




Online Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12168
  • Better Things To Come Member Since 2/16/06
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Edison1970

  • Jr. Member
  • **
  • Posts: 489
Re: 70 Cuda door panel -fuzzies-trim-upper window rubber- installation
« Reply #2 on: August 08, 2017 - 07:36:37 pm »
I may be wrong buy I think most of the aftermarket pieces are riveted.  I have an older set that I think were from year one.  They came with rivets also.  I was going to re-use the original screws but the holes don't line up. 


Offline Rich G

  • Jr. Member
  • **
  • Posts: 354
Re: 70 Cuda door panel -fuzzies-trim-upper window rubber- installation
« Reply #3 on: August 08, 2017 - 10:31:01 pm »
I just riveted them on and paint the rivet head black and you'll hardly notice them.