Author Topic: Water Pump Hookup for a 6.1 Hemi with 5.7 Hemi front end  (Read 195 times)

Offline George72Cuda

  • Jr. Member
  • **
  • Posts: 29
Water Pump Hookup for a 6.1 Hemi with 5.7 Hemi front end
« on: April 06, 2017 - 10:16:56 pm »
I have a 6.1 Generation III Hemi which I think has a 5.7 Hemi front end section from a truck. The alternator and AC is located up high. Both of the heater hose connections are located down low on the passenger side. One connection is silver while the other connection is a black tube which runs up to the top of the pump.  I need to know which line is considered the water pump and which one is the intake.
« Last Edit: April 12, 2017 - 09:42:25 am by George72Cuda »




Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5262
Re: Water Pump Hookup for a 6.1 Hemi
« Reply #1 on: April 06, 2017 - 10:21:07 pm »
I am plumbing my driver's side water pump tube > Vintage Air heater valve > Heater Core

That's what my researched showed, the passenger side tube should be a "return" back to the engine.
:working: Build Page: Goody's 'Cuda Build Page :working:

2016 Subaru WRX
2016 BMW X1
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum - In progress

Wheel & Tire Specs:Link
Aftermarket Gauges:Link

Offline George72Cuda

  • Jr. Member
  • **
  • Posts: 29
Re: Water Pump Hookup for a 6.1 Hemi with 5.7 Hemi front end
« Reply #2 on: April 12, 2017 - 09:43:58 am »
Thanks for the information. I modified my question and am still looking for information.