Author Topic: 71 Barracuda door panels  (Read 226 times)

Offline HEMIHUNTER

  • Jr. Member
  • **
  • Posts: 192
  • R71CUDA
71 Barracuda door panels
« on: March 12, 2021 - 09:29:37 PM »
I would like to get new door panels armrests then basically restore the interior doors with new power window switches,

 I would love advice on where to buy what I just got my new classic industries catalog and the door panels and kick panels don't seem to match
1971 Barracuda Convertible  #'s 318/904
1968 Barracuda Fastback   Built 360/ R727
1965 Coronet 440  #'s 383/4bbl  4sp  Dealer installed dual  carbs
2008 SRT8 Challenger




Offline HEMIHUNTER

  • Jr. Member
  • **
  • Posts: 192
  • R71CUDA
Re: 71 Barracuda door panels
« Reply #1 on: March 12, 2021 - 09:30:53 PM »
I also need correct fro t seats
1971 Barracuda Convertible  #'s 318/904
1968 Barracuda Fastback   Built 360/ R727
1965 Coronet 440  #'s 383/4bbl  4sp  Dealer installed dual  carbs
2008 SRT8 Challenger

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6403
Re: 71 Barracuda door panels
« Reply #2 on: March 12, 2021 - 10:24:12 PM »
Try Roseville Moparts or Classic industries.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9032
  • Tastes Like Chicken
Re: 71 Barracuda door panels
« Reply #3 on: March 13, 2021 - 09:56:45 AM »
I second that.  Roseville is awesome! 
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline HEMIHUNTER

  • Jr. Member
  • **
  • Posts: 192
  • R71CUDA
Re: 71 Barracuda door panels
« Reply #4 on: March 13, 2021 - 11:45:34 AM »
Thk you,  i will look at Roseville..  I have the classic industries new catalog that came last week however when I look at the door panels there seemed to be 2 different kinds and I'm not sure which one is more correct I will try to attach a picture
1971 Barracuda Convertible  #'s 318/904
1968 Barracuda Fastback   Built 360/ R727
1965 Coronet 440  #'s 383/4bbl  4sp  Dealer installed dual  carbs
2008 SRT8 Challenger

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9032
  • Tastes Like Chicken
Re: 71 Barracuda door panels
« Reply #5 on: March 15, 2021 - 03:27:31 PM »
good luck posting pictures.
Cuda door panels are different than challenger.
A cuda/barracuda door panel will be slightly different from a 70-71 gran coupe door panel.
Only because there is colored piping and holes for the gran coupe emblem.
No other difference's in the years as far as I know.
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6403
Re: 71 Barracuda door panels
« Reply #6 on: March 16, 2021 - 11:49:05 AM »
The panels are the same year to year with them the exception of the previous mentioned Gran Coupe. The Cuda panels are the same as the Barracuda except that it has "Cuda" emblem attached to them; in fact I am pretty sure that new panels don't have the holes for the emblems (at least mine didn't).
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9032
  • Tastes Like Chicken
Re: 71 Barracuda door panels
« Reply #7 on: March 17, 2021 - 10:20:45 PM »
I'm pretty sure your right.  My reds didn't have any holes drilled.  Metro's. 
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee