Author Topic: Spacers for stock rocker arms  (Read 380 times)

Offline dana60

  • Jr. Member
  • **
  • Posts: 119
Spacers for stock rocker arms
« on: October 03, 2017 - 06:02:51 pm »
Does anyone know where I can get spacers for a stock pair of rocker arms? I was trying to solve my valve train noise and noticed a couple of pushrods that are are rubbing on my aluminum heads. I am using the stock stamped rocker arms. Thanks All!!

 :wavingflag:




Offline larry4406

  • Jr. Member
  • **
  • Posts: 349
Re: Spacers for stock rocker arms
« Reply #1 on: October 03, 2017 - 08:28:34 pm »
Years ago I used valve spring shims. They had an inside diameter that matched the rocker shafts. I ground the edges of the rocker shaft hold down piece to center the Isky rockers I ran.

Offline Aracer

  • Jr. Member
  • **
  • Posts: 441
Re: Spacers for stock rocker arms
« Reply #2 on: November 01, 2017 - 11:19:14 pm »
Mancinni's has the .030 MP shaft spacers.