Barracuda Challenger Forum

Author Topic: 5/16 to 3/8 fuel line  (Read 357 times)

Offline Cudakiller70

  • Sr. Member
  • ****
  • Posts: 1715
Re: 5/16 to 3/8 fuel line
« Reply #15 on: June 22, 2017 - 08:23:07 pm »
Be sure to use a good fuel hose something like  SAE J30R14T1 should be printed right on the hose. Oriellys had it on stock. SS braided does not necessarily mean it's a good hose, it's the inside that matters good luck  :2thumbs:
More info http://www.underhoodservice.com/correct-fuel-hose-installation/
Auto spell I'm tired of your shirt
The above is just my opinion
Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.
John Adams




Offline DadsCuda

  • Jr. Member
  • **
  • Posts: 73
Re: 5/16 to 3/8 fuel line
« Reply #16 on: June 23, 2017 - 04:14:32 am »
Be sure to use a good fuel hose something like  SAE J30R14T1 should be printed right on the hose. Oriellys had it on stock. SS braided does not necessarily mean it's a good hose, it's the inside that matters good luck  :2thumbs:
More info http://www.underhoodservice.com/correct-fuel-hose-installation/

Thank you!  :cheers:

Offline cudabob496

  • Sr. Resident
  • ******
  • Posts: 6459
Re: 5/16 to 3/8 fuel line
« Reply #17 on: June 23, 2017 - 03:52:05 pm »
and ethanol dissolves rubber over time
72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.
Up to 4000 RPM, Warp Speed, Up to 5000, Rediculous Speed, Up to 6000 RPM, Ludicrous Speed!

1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"