Author Topic: heat sheild hardware  (Read 314 times)

Offline culp71

  • Full Member
  • ***
  • Posts: 645
heat sheild hardware
« on: June 12, 2017 - 10:51:14 am »
what is the proper hardware that was used to mount these heat shields?




Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5928
Re: heat sheild hardware
« Reply #1 on: June 12, 2017 - 12:37:25 pm »
The rear muffler hangers mount to the one end. The others are just self tapping sheet metal screws.  I'd have to look at my fastener guide when I get home to give the exact specs.

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5928
Re: heat sheild hardware
« Reply #2 on: June 13, 2017 - 10:11:51 am »
According to the fastener guide, the heat shield uses...

(6) 1/4-20 x .75 long  Flange head self-tapping bolts with single flute paint cutter. Silver zinc


Offline culp71

  • Full Member
  • ***
  • Posts: 645
Re: heat sheild hardware
« Reply #3 on: June 13, 2017 - 10:14:34 am »
now that's some detailed info, thanks

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5928
Re: heat sheild hardware
« Reply #4 on: June 13, 2017 - 10:17:24 am »

Offline 1 Wild R/T

  • Resident
  • *****
  • Posts: 4225
Re: heat sheild hardware
« Reply #5 on: June 13, 2017 - 12:32:34 pm »
According to the fastener guide, the heat shield uses...

(6) 1/4-20 x .75 long  Flange head self-tapping bolts with single flute paint cutter. Silver zinc

Be nice if they mentioned the reduced head size... 1/4-20 normally has a 7/16 head... These bolts have a 3/8 head..
JS27N0B 70 Challenger R/T Convertible  FJ5 Sublime, Show Poodle w/90,000 miles since resto
WS27L8G 68 Coronet R/T Convertible  PP1 Bright Red, Project
RM21H9E 69 Road Runner Coupe R4 Performance Red, Sold...
5H21C  65 Falcon 2 dr Wagon... Dog Hauler...

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5928
Re: heat sheild hardware
« Reply #6 on: June 13, 2017 - 01:01:15 pm »
That's why I posted the picture.  The guide probably has that info but I was in a hurry this morning when I looked through it.