I posted a few days ago asking about my wiper motor/ switch/ linkage.
Here's what I have ....
What do I need???
Wiper motor 3 spd
Switch is 2 speed. w/ 5 spade lugs
My dash panel says wiper washer
(I don't see any washer parts on the car)
My dash wiring harness has 6 connector plug. (the brown wire connector has no male spade on the switch to match it.)
The motor has 4 wire harness connected to firewall plug.
The wiper arms linkage was not hooked up when I got the car.
When the wiper motor is off (parked) and the wiper arms are in the retracted position, the linkage is a couple of inches away from the motor pivot arm??
So, What's wrong? switch or motor or linkage or all?
I'm lost on how to correct.
Also what about the washer words on the dash?
Should the fender tag call out if it was 3-speed??
I have decoded that and no 3 spd wiper code.
Below are pics !
Thanks for any help!