Author Topic: turn signal  (Read 1086 times)

Offline 71chmark

  • Full Member
  • ***
  • Posts: 771
turn signal
« on: July 20, 2018 - 03:37:14 PM »
Left front and left dash indicator turn signal indicator stopped working. I can hear the relay clicking. The left rear works.Turn signals work fine on the right side. All the lights come on normal with the headlight switch just the front left won't blink. The turn signal housing is new and was working. The bulb looks good. Wondering if it's something under the dash. Ugh. I guess I'll try replacing the bulb to make sure but is looks fine and was relatively new. Anyone have any advice. Thanks
I may be schizophrenic,
but at least I have each other




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6483
Re: turn signal
« Reply #1 on: July 20, 2018 - 04:02:40 PM »
Perhaps a bad ground, very common problem.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline ragtopdodge

  • Resident
  • *****
  • Posts: 4065
Re: turn signal
« Reply #2 on: July 26, 2018 - 05:45:30 PM »
Yes, clean the bulb socket(s) on either the front or rear lights.  Usually the fronts what corrodes the most often.
'70 318-auto Chally 'vert
'71 383-auto 'Cuda 'vert (sold)
06 300c SRT8
04 2500 QCLB 4x4 HO

Offline javakm70cuda

  • Jr. Member
  • **
  • Posts: 122
Re: turn signal
« Reply #3 on: March 22, 2019 - 02:50:01 AM »
Hello 71chmark,
Wondering if you discovered the cause of your issue mentioned in you post on cuda-challenger last year? Sounds very similar to an issue I am currently going through trying to resolve. Please let me know what you did to resolve if you have the opportunity.
Thank you

Offline javakm70cuda

  • Jr. Member
  • **
  • Posts: 122
Re: turn signal
« Reply #4 on: March 22, 2019 - 09:35:01 AM »
Found issue. Connection to steering column. Cleaned up connector on LGN wire to steering column. Blinker works fine & bulb in dash flash. Blinker with headlight switch on works correctly also.
 :working:

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6483
Re: turn signal
« Reply #5 on: March 22, 2019 - 01:14:48 PM »
 :2thumbs:
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)