Author Topic: SOLD...71 Cuda project with lots of extra parts...SOLD...  (Read 3180 times)

Offline plumbeeper

  • Sponsor
  • Jr. Member
  • ***
  • Posts: 233
    • WOODGRAINWHEELS.COM
SOLD...71 Cuda project with lots of extra parts...SOLD...
« on: July 30, 2017 - 11:37:03 PM »

SOLD...SOLD...SOLD

71 Cuda, originally 383 four speed. Did not have original engine or tranny when I bought it 20 years ago. My dream car is a 440-6 auto so that's the direction I was building it. Unfortunately I've ran out of time and space so it has to go.

 The previous owner had parted out 3 Cudas and a lot of those parts came with it. I disassembled it, blasted the shell, installed new quarters, trunk floor extensions, outer wheel houses, trunk floor and driver side floor pan. It has been sitting in this condition since 2001 in my heated garage.

Some of the parts that go with this...

6) doors, 3) trunk lids, 2) rallye hoods, 1) flat hood, 3) fenders, 1) auto trans., 1) 383 engine, 1) 440 engine, 1) 6-pack intake and carbs, 1) 8-3/4 rear, 1) Dana 60 rear, several pieces of glass, more than enough for a complete set, 1) K-member and all front suspension. Lots of new parts, fender gills, fog lights, turn signal lenses, mirrors, fuel and brake lines, NOS tail pipe extensions, go-wing with kit. Everything I have that has to do with a Cuda goes. It will take a big box truck or several pick-up and trailer loads to get all of this.

$20,000 or best offer. I'm not interested in trades. I can assist with moving, delivery within reason. More pics available.

plumbeeper@yahoo.com

Call 8 am to 8 pm EST (no texts) 812-593-4328







Offline cudamadd

  • Sr. Member
  • ****
  • Posts: 1070
    • cudamad157071@gmail.com
Re: 71 Cuda project with lots of extra parts
« Reply #1 on: July 30, 2017 - 11:46:56 PM »
IF only i lived in the U.S it would be my next build  :aussie:
Go 4 a spin Ya Why Not.

Offline tony 73

  • Jr. Member
  • **
  • Posts: 324
Re: 71 Cuda project with lots of extra parts
« Reply #2 on: July 31, 2017 - 06:50:39 AM »
Have PMed and sent email, very interested.

Offline FC7 CUDA

  • Jr. Member
  • **
  • Posts: 178
Re: 71 Cuda project with lots of extra parts
« Reply #3 on: August 06, 2017 - 07:17:56 AM »
Do you have a tag?