Author Topic: Turn signal switch  (Read 1954 times)

Offline cudaaah

  • Jr. Member
  • **
  • Posts: 310
  • 71 HEMI cuda, 2015 ram 2500 mega cab diesal 4x4
Turn signal switch
« on: July 09, 2016 - 08:31:46 AM »
Installing LED tail lights...I pulled ash tray and couldn't see a switch.   There was nothing attached to the ash tray bracket..My car was rebuilt and I don't know if they relocated???  Does anyone have a pic of what it looks like??  Going to Carlisle and would like to get them working.   Thanks




Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: Turn signal switch
« Reply #1 on: July 09, 2016 - 10:04:21 AM »
Are you referring to the "flasher unit" ?

There's two, one for the signals and one for the four ways. One above the column and one on the ash tray. They are plugged into a two prong connector in a "L" fashion.
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline tman

  • Sr. Member
  • ****
  • Posts: 1331
Re: Turn signal switch
« Reply #2 on: July 09, 2016 - 11:12:22 AM »

Offline cudaaah

  • Jr. Member
  • **
  • Posts: 310
  • 71 HEMI cuda, 2015 ram 2500 mega cab diesal 4x4
Re: Turn signal switch
« Reply #3 on: July 09, 2016 - 11:56:57 AM »
Found it.  Thanks,  Tucked out of the way.  I added A/C and it's pretty crowded behind the dash... got it wired up, just need to clean it up.   Hope to meet some members in Carlisle.

Offline 73440

  • Sr. Member
  • ****
  • Posts: 1826
Re: Turn signal switch
« Reply #4 on: July 09, 2016 - 05:06:19 PM »
Cudaaah, that is a good looking 71, love that green!
67 440
72 413 / 727
73 Barracuda w/ 68 440
65 Plymouth Fury III , I sold ,was my Nana's car till 92 yo.
51 Ford F1 239 Flathead, flipped , new cab , stolen
59 BelAir 283 4 door original patina
01 Chevy van 420, 520 miles
06 Crown Vic Police Interceptor
75 HD Ironhead converted to RH shift
73 HD Ironhead
82 HD Ironhead
74 Norton 850
80 HD Shovelhead
80 Husqvarna WR 390

Offline tman

  • Sr. Member
  • ****
  • Posts: 1331
Re: Turn signal switch
« Reply #5 on: July 09, 2016 - 05:34:34 PM »
Found it.  Thanks,  Tucked out of the way.  I added A/C and it's pretty crowded behind the dash... got it wired up, just need to clean it up.   Hope to meet some members in Carlisle.

If your LED's do not flash right, then you have to reverse the leads to the flasher you just changed out.  If its working fine, you are good.