I'm in, but have limited availability over the weekend. I will have some time Saturday, and some time Sunday to devote to Andy.
Still trying to track down some parts to make it happen.
I'll definitely bring some beer!
I'll see if I can get an updated list posted.
That engine and front cradle have to get in that car!
We are too close, and a few extra bodies can meke it happen. I don't care if we have to push him down the road!
This is fact..Engine:
Has a Torque converter 2800
Does not have a flex plate
Bolts to crank- 6-11-14
Bolts to converter 6-11-14No fuel pump
Fuel supply line-told not to get- JimmyNick?No Fuel line pump to carb-
Calling Dave tomorrow on the Accelerator linkage(throttle cable)
Carb-yes Serpentine belt set up (ST concepts) ---**does not have belt**
**Getting pulleys from Jerry**
Headers: yes, got 'em
Trans- yes; timing questionable
Driveshaft- no 4C and Brad to bring?
U joints- no
Brad to bring spareCooling system:
Radiator-aftermarket; stock hose locations
Water pump- need a hi volume run in either direction Rad hoses- no
Radiator hoses - noIgnition system/electrical
Alternator- NipponDenso- need pigtail for NiponDenso
Need battery cables
Has a new engine bay harness
Has chrome ECU, afraid it will burn out
Ballast resistor: 6-11-14
Dizzy-MEK, question on arrival timeFront suspension
Upper control arms yes, got em
Lower control arms yes, got em
Bushings--?? More definition needed
Ball joints yes,got 'em
Pitman arm- yes, got 'em
Drag link ass'y- yes,got em
Camber bolts- yes, got em
K frame bolts - yes, got em
Torsion bars - yes, got em
Steering box- DMZ- has spare, will check spline count.
( I think he has it rebuilt)
I'll update more as needed...
contact me directly at 248-709-8273