Author Topic: AC control switch  (Read 1259 times)

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
AC control switch
« on: August 16, 2010 - 09:35:32 PM »
Worth anything?




Offline nqkjw

  • Full Member
  • ***
  • Posts: 512
Re: AC control switch
« Reply #1 on: October 22, 2010 - 07:29:50 AM »
It would be to me if it suited a rallye dash and not the standard dash :swear:
Burnouts are cool but Traction is the Action

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: AC control switch
« Reply #2 on: October 22, 2010 - 08:35:01 AM »
I would venture to guess that some where in the near future, they will get really pricey with all the standard dash conversion kits being made the last couple of years,with the aftermarket gauges.  So the price will probably climb to about the same as the ralley one

Offline VTMopar

  • Sr. Member
  • ****
  • Posts: 1056
  • '70 Challenger Convertible, '74 Challenger Rallye,
Re: AC control switch
« Reply #3 on: October 22, 2010 - 08:51:38 PM »
Well - another way to look at it.....   The vaccum switch sells new (NOS) for between $75 and $150 (from my research).    New repop chrome buttons are at PG I think run close to 200......     Kind of like the guys on wall street that buy a company and sell off the parts (worth more than the whole)....

VT Mopar     
VT MOPAR

Offline Aussie Challenger

  • Resident
  • *****
  • Posts: 3407
  • In Kansas loaded for Drive to West Coast.
Re: AC control switch
« Reply #4 on: October 24, 2010 - 04:48:34 AM »
Did you check and make a note where all the vac lines went? 
Dave

Offline nqkjw

  • Full Member
  • ***
  • Posts: 512
Re: AC control switch
« Reply #5 on: October 24, 2010 - 08:00:30 AM »
Did you check and make a note where all the vac lines went?

Mine are all on a one piece plug and just push onto the vac control.
Mine works fine.It's just that it's a std dash one.
Burnouts are cool but Traction is the Action

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: AC control switch
« Reply #6 on: October 24, 2010 - 08:01:40 AM »
Did you check and make a note where all the vac lines went?
Don't need to,each push in switch is marked.
I gave it away anyway.

Offline Aussie Challenger

  • Resident
  • *****
  • Posts: 3407
  • In Kansas loaded for Drive to West Coast.
Re: AC control switch
« Reply #7 on: October 25, 2010 - 05:50:53 AM »
I have the standard dash A/C controls but everything in between is missing and nobody seems know or have a diagram of which pipes go where. When I get my Challenger out of storage I will be trying to work it out.
Dave

Offline nqkjw

  • Full Member
  • ***
  • Posts: 512
Re: AC control switch
« Reply #8 on: October 26, 2010 - 03:22:39 AM »
I have the standard dash A/C controls but everything in between is missing and nobody seems know or have a diagram of which pipes go where. When I get my Challenger out of storage I will be trying to work it out.

When the time comes I've got the info you need.
Just give us a yell.
Burnouts are cool but Traction is the Action

Offline Aussie Challenger

  • Resident
  • *****
  • Posts: 3407
  • In Kansas loaded for Drive to West Coast.
Re: AC control switch
« Reply #9 on: October 26, 2010 - 05:34:41 AM »
Thanks for that Ken, I will also be mounting my seat belts the same as yours, much neater presentation.   :2thumbs:   :cheers:
Dave