Author Topic: Modified rallye dash  (Read 1329 times)

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Modified rallye dash
« on: February 01, 2008 - 04:00:57 PM »
What would you guys pay for something like this?

No harness, aftermarket tach.

Tom :dunno:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear




Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Modified rallye dash
« Reply #1 on: February 01, 2008 - 04:40:07 PM »
Do you want the aftermarket tach?  :dunno:

If not, hopefully the hole hasn't been enlarged, so you could put an original back in there. You have to figure the clock needs a quartz conversion. Does the reset knob come with it? The 4-gauge cluster looks like they all work to me. Does this have the voltage limiter and wiring for those little gauges? This is a toughie!!  :banghead:

I would most definitely pay $350. My top limit... maybe $500 or so, depending on the answers to my questions.  :lol:


  Mike
« Last Edit: February 01, 2008 - 04:41:43 PM by MEK-Dangerfield »

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Modified rallye dash
« Reply #2 on: February 01, 2008 - 04:46:01 PM »
I'll ask for a backside photo.   :nono:  :roflsmiley:

Also ask about the hole for the tach, since I would rather have a factory one.

Tom

Price is inline with your lower #. :2cents:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline 73Chally

  • Resident
  • *****
  • Posts: 2381
Re: Modified rallye dash
« Reply #3 on: February 01, 2008 - 05:26:46 PM »
To be honest, I would have to say that setup is worth probably $600+ easy, assuming the gauges are all good and you can put in the correct tac.  You might even do better selling the stuff individually.  the light bar alone is worth $100+ if it is in good working order.  A word of advice, though, is spend the $25 for a new woodgrain overlay to put on over the carbon fiber overlay, and you will easily get back that money and a lot more.  As crazy as these things are selling for, I would say you could possibly get up to $800.  Complete, restored sets are selling for over $2K on Ebay.  The only thing you're missing is the harness and heater panel.  A set of just the gauge pod (gauges, bezel, housing, clear lens) bid up to over $600 and did not meet reserve last week.

Offline Challenger6pak

  • Resident
  • *****
  • Posts: 4084
Re: Modified rallye dash
« Reply #4 on: February 01, 2008 - 05:53:42 PM »
I would put a stock tac back in it along with new woodgrain.  Then it will sell for more and faster.  If it wasn't in nice condition I would say sell as is.  It looks too nice to miss the opportunity to finish it out. . 
1969 Sport Satellite H code convertible, 1970 Cuda 440+6, 1970 Challenger R/T 440+6, 1970 Challenger 383 R/T auto, 1970 Challenger R/T 383 4 speed,1971 Challenger convertible.

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Modified rallye dash
« Reply #5 on: February 01, 2008 - 06:09:47 PM »
I was going to buy it for me.  Have a chance at around 350 for it.  So i guess it would be a good deal.  No shipping helps too.

Tom :2thumbs:

Still waiting on the backside photos too.

I kinda like the CF and could always change it later. :2cents:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Modified rallye dash
« Reply #6 on: February 01, 2008 - 06:25:33 PM »
Guys, just a note. This is a later years dash. NO way it is going for anywhere close to $1000.

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Modified rallye dash
« Reply #7 on: February 01, 2008 - 10:20:30 PM »
Ok, so I got some pics of the backside, I honestly don't know what I'm looking at but it looks to me that something was modified to fit the tach.  The million dollar question is can a factory tach be put back in?

MEK you were right the clock needs quartz upgrade.  No reset for it but the reset for the speedo is there. 

He says the 4 guages bench tested ok.

WWYD?

Tom :dunno:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Modified rallye dash
« Reply #8 on: February 01, 2008 - 10:21:56 PM »
And to add to this how much is a harness for this? and how much for a heater switch panel.  I got seperate leads on these locally as well.

Tom
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear